FixVault
Home › Chevrolet › 2011 › Impala LTZ › Repair and Diagnosis › Body & Frame › Fixed And MOVEABLE Windows › Diagnostic Information and Procedures › Power Windows Malfunction › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, command the driver window UP and DOWN using the S79D window switch-driver. The driver window should perform the UP and DOWN functions.
    • If the driver window does not perform the UP or DOWN function, refer to Driver Window Malfunction in Circuit/System Testing .
  2. Command each passenger and rear window UP and DOWN using the appropriate switches on the S79D window switch-driver and by using the 79P window switch-passenger, S79LR window switch-left rear and S79RR window switch-right rear. Each window should perform the UP and DOWN functions from each switch.
    • If the passenger window does not perform as specified, refer to Front Passenger Window Malfunction in Circuit/System Testing .
    • If either rear window does not perform as specified, refer to Rear Window Malfunction in Circuit/System Testing 
  3. Disable and enable the rear S79 window switch by pressing and depressing the lockout switch on the S79D window switch-driver. The S79LR window switch-left rear and S79RR window switch-right rear should be enabled and disabled when changing between the commanded states.
    • If the S79LR window switch-left rear and S79RR window switch-right rear continue to function while disabled, refer to Lockout Switch Malfunction in Circuit/System Testing .
About FixVault