Sensor - Transmission Range: Installation

Fig 1: Manual Shaft Retaining Screw

Courtesy of DAIMLERCHRYSLER CORP.

1 - SCREW

2 - TRS

1. Install the TRS (2) to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
2. Install the TRS/manual shaft retaining screw (1) and torque to 5 N.m (45 in. lbs.) torque. See Fig 1.
   Fig 2: Manual Shaft Seal - Typical

   Courtesy of DAIMLERCHRYSLER CORP.

   1 - SEAL

   2 - MANUAL SHAFT

3. Install the manual shaft seal (1). See Fig 2.
4. Install valve body to the transmission. (Refer to TRANSMISSION//AUTOMATIC - 42RLE/VALVE BODY - INSTALLATION)