Integrated Control Unit - MK25: Assembly

Fig 1: Removing/Instating ABM

Courtesy of DAIMLERCHRYSLER CORP.

1. Align ABM solenoids and pump/motor wiring connector (4) with HCU valves (2) and connector passage. Slide ABM (1) onto HCU (3).
   Fig 2: Removing/Installing Screws

   Courtesy of DAIMLERCHRYSLER CORP.
2. Install three screws (2) attaching ABM (1). Tighten screws to 2 N.m (17 in. lbs.) torque.
3. Attach mounting bracket to HCU. Install two mounting bracket attaching screws and tighten to 11 N.m (97 in. lbs.) torque.
4. Install ICU in vehicle. (Refer to BRAKES/HYDRAULIC/MECHANICAL/ICU (INTEGRATED CONTROL UNIT) - INSTALLATION )