FixVault
Home › Dodge and Ram › 2008 › Sprinter 3500, Van Cargo › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Electronic Control Modules - Service Information › Module-Glow Plug › Removal › Glow Plug Module

Glow Plug Module

  1. Disconnect the negative battery cable.
    Fig 1: Glow Plug Module
    GC0065482Courtesy of CHRYSLER LLC
  2. Disconnect the battery positive harness connector (3) from the glow plug module.
  3. Disconnect the glow plug harness connector (4).
  4. Remove the two glow plug module bolts (2).
  5. Remove the glow plug module (1).
About FixVault