Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Connector-To-Case Cooler Line Nut | ||
| Front Cooler Line | 15 (20) | |
| Rear Cooler Line | 18 (24) | |
| Control Assembly-To-Pump Body Bolts | 18-23 (24-31) | |
| Converter Drain Plug | 18-23 (24-31) | |
| Cooler Bypass Valve Case Bolts | ||
| Case Outlet Bolt (Front) | 22 (30) | |
| Case Inlet Bolt (Rear) | 27 (36) | |
| Extension Housing-To-Case Bolts | 30-40 (41-54) | |
| Inner One-Way Clutch Race-To-Case Bolts | 18-25 (24-34) | |
| Manual Lever Nut | ||
| Inner | 30-40 (41-54) | |
| Outer | 20-29 (27-39) | |
| Oil Pan-To-Case Bolts | 10-12 (14-16) | |
| Oil Pump Body-To-Case Bolts | 18-23 (24-31) | |
| Parking Pawl Abutment-To-Case Bolts | 16-20 (22-27) | |
| Parking Rod Guide Plate-To-Case Bolts | 16-20 (22-27) | |
| Rear Mount-To-Transmission Bolts | 30-40 (41-54) | |
| Rear Mount-To-Crossmember Nuts | 50-70 (68-95) | |
| INCH Lbs. (N.m) | ||
| Detent Spring-To-Case Bolt | 80-97 (9-11) | |
| Excursion Belly Pan Bolt | 27 (3) | |
| Fluid Feed Bolt | ||
| Intermediate-Overdrive Clutch Cylinder | 71-124 (8-14) | |
| Center Support | 97-144 (11-16) | |
| Line Pressure Case Plug | 71-144 (8-16) | |
| Lower Body-To-Main Body Bolts | 80-97 (9-11) | |
| Main Accumulator & Solenoid Body-To-Case Bolts | 80-97 (9-11) | |
| Main & Lower Body-To-Case Bolts | 80-97 (9-11) | |
| Output Shaft Speed (OSS) Sensor Bolt | 71-88 INCH Lbs. (8-10 N.m) | |
| Reinforcing Plate-To-Case Bolts | 80-97 (9-11) | |
| Solenoid Body-To-Case Bolts | 80-97 (9-11) | |
| Stator Support-To-Pump Body Bolts | 80-97 (9-11) | |
| Transmission Range (TR) Sensor | 71-88 INCH Lbs. (8-10 N.m) | |
| Turbine Shaft Speed (TSS) Sensor Bolt | 71-88 INCH Lbs. (8-10 N.m) | |
| Valve Body-To-Case Long Stud | 80-97 (9-11) | |
| Valve Body-To-Case Nut | 80-97 (9-11) | |
| Valve Body-To-Case Short Stud | 80-97 (9-11) | |