FixVault
Home › Ford › 2005 › Expedition RWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine › In-Vehicle Repair › Flexplate › Removal and Installation

Removal and Installation

  1. Remove the transmission. For additional information, refer to AUTOMATIC TRANSMISSION - 6HP26 or AUTOMATIC TRANSMISSION - 4R70E/4R75E .
  2. Remove the 8 bolts and the flexplate.
    • To install, tighten to 80 Nm (59 lb-ft) in the sequence shown.
    Fig 1: Identifying Flexplate Bolt Tightening Sequence
    G03920141Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
About FixVault