Four-Wheel Drive Systems (2 Of 2)
- Diagnosis And Testing
- Four-Wheel Drive Systems - Raptor, Vehicles With: 4HI-LOC Torque on Demand Transfer Case
- Diagnostic Trouble Code (DTC) Chart
- Symptom Charts
- Pinpoint Tests
- Pinpoint Test A : Four-Wheel Drive (4WD) System Functional Test
- Pinpoint Test B : B11D9:16, B11D9:17, P0562:00, P0563:00
- Pinpoint Test C : Module Internal Fault
- Pinpoint Test D : DTC U300D:11
- Pinpoint Test E : IWE Solenoid - Electrical Fault
- Pinpoint Test F : Grinding / Clicking / Ratcheting Noise From Front Axle In 2H Mode Under Acceleration Or Heavy Loads
- Pinpoint Test G : Lost Communication With Another Module
- Pinpoint Test H : P1839, P1840, P1841
- Pinpoint Test I : Shift Motor Contact Plates
- Pinpoint Test J : P184A, P184B
- Pinpoint Test K : P1825, P1826 And P1827
- Pinpoint Test L : Missing Or Invalid Data Received From Another Module
- Pinpoint Test M : U2300
- Four-Wheel Drive Systems - Vehicles With: Electronic Shift Transfer Case
- DTC Charts
- Symptom Charts
- Pinpoint Tests
- Pinpoint Test A : The Vehicle Does Not Shift Between 4H And 4L Modes Correctly
- Pinpoint Test B : The Front Axle Does Not Engage/Disengage Correctly
- Pinpoint Test C : The Transfer Case Jumps Out Of Gear
- Pinpoint Test D : Grinding / Clicking / Ratcheting Noise From Front Axle In 2H Mode Under Acceleration Or Heavy Loads
- Pinpoint Test E : The 4WD Does Not Engage At Speed Correctly
- Pinpoint Test F : Electronic Shift-On-The-Fly (ESOF) System Functional Test
- Pinpoint Test G : U0100
- Pinpoint Test H : U0121
- Pinpoint Test I : U0140
- Pinpoint Test J : DTCS P0562:00 Or P0563:00
- Pinpoint Test K : DTC U0101
- Pinpoint Test L : Shift Motor - Electrical Or Mechanical Fault
- Pinpoint Test M : DTCS P1812:00, P1815:00
- Pinpoint Test N: Grinding / Clicking / Ratcheting Noise From Front Axle In 2H Mode Under Acceleration Or Heavy Loads
- Four-Wheel Drive Systems - Raptor, Vehicles With: 4HI-LOC Torque on Demand Transfer Case
- General Procedures
- Removal And Installation