Power Mirror Actuator Test: Notes

Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the power mirror 6P connector (A).

Fig 1: Identifying Power Mirror 6P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check actuator operation by connecting power and ground according to the table below.
Power Mirror Actuator

Fig 2: Identifying Power Mirror Actuator Continuity Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the mirror fails to work properly, check for an open in the wire between the connector and the mirror holder. If the wire is OK, replace the mirror actuator, (see POWER MIRROR ACTUATOR REPLACEMENT ).
Perform power mirror defogger test (see Defogger Test ).