Audio Assemble Replacement

Remove the center facia panel (See CLUSTER FACIA PANEL REPLACEMENT ).
Loosen the screws.
Disconnect the audio connector and antenna cable, then remove the audio assembly (A).

Fig 1: Locating Audio Assembly
Courtesy of HYUNDAI MOTOR CO.
Disconnect the audio connector (A) and antenna cable (B), then remove the audio assembly (C).

Fig 2: Locating Audio Connector, Antenna Cable And Audio Assembly
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.