Removal And Installation For Combination Meter: Removal

WARNING: This page is about a different car, the 2004 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cluster lid A. Refer to INSTRUMENT PANEL ASSEMBLY .
Remove the screws (4) with power tool, and disconnect connectors.
Rotating the combination meter so that the left-side is in front, turn it until the meter face comes to the top.
CAUTION: To prevent it from being damaged by interference with the meter bracket, protect the meter with cloth.

Fig 1: Removing & Installing Combination Meter (1 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Removing & Installing Combination Meter (2 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Removing & Installing Combination Meter (3 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

While pulling combination meter forward, pull it out to the right (combination meter back-side shall be in front).