Section 218 (Driver Information System)
WARNING: This page is about a different car, the 2004 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.
- Precaution
- Preparation
- Combination Meters
- System Description
- Can Communication System Description
- Can Communication Unit
- Component Parts And Harness Connector Location
- Combination Meter/Without ICC System Check
- Combination Meter/With ICC System Check
- Schematic
- Wiring Diagram - Meter
- Terminals And Reference Value For Combination Meter
- Meter/Gauges Operation, ODO/Trip Meter, A/T Indicator And ICC System Display
- How To Proceed With Trouble Diagnosis
- Diagnosis Flow
- Trouble Diagnosis Chart By Symptom
- Power Supply And Ground Circuit Check
- Inspection/Engine Speed Signal
- Inspection/Water Temperature Gauge
- Inspection/Vehicle Speed Signal
- Inspection/Fuel Level Sensor Unit
- Fuel Gauge Pointer Fluctuates, Indicator Wrong Value, Or Varies
- Fuel Gauge Does Not Move To Full Position
- ICC System Display Does Not Illuminate
- Electrical Components Inspection
- Removal And Installation For Combination Meter
- Disassembly And Assembly For Combination Meter
- Compass
- Warning Lamps
- System Description
- Outline
- Air Bag Warning Lamp
- Door Warning Lamp
- Active Damper Indicator Lamp (Sport)
- Low Oil Pressure Warning Lamp
- Charge Warning Lamp
- Low Washer Level Warning Lamp
- A/T Oil Temperature Warning Lamp
- Low-Fuel Level Warning Lamp
- ABS Warning Lamp
- VDC OFF Indicator Lamp
- SLIP Indicator Lamp
- Seat Belt Warning Lamp
- Brake Warning Lamp
- Malfunction Indicator Lamp
- Low Tire Pressure Warning Lamp
- ASCD Warning Lamp
- ICC System Warning Lamp
- Warning Message On Display
- Schematic
- Wiring Diagram - Warn
- Terminals And Reference Value For BCM
- Work Flow
- Preliminary Inspection
- Consult-II Function
- On Board Diagnosis
- Trouble Diagnosis For Door Warning Lamp
- Combination Meter Circuit Inspection
- Front Door Switch Inspection
- Rear Door Switch Inspection
- Electrical Components Inspection
- System Description
- A/T Indicator
- Warning Chime
- System Description
- Component Parts And Harness Connector Location
- Major Component Parts And Function
- Schematic
- Wiring Diagram - Chime
- Terminals And Reference Value Chart For BCM
- Work Flow
- Preliminary Inspection
- Consult- II Function
- On Board Diagnosis
- Symptom Chart
- Warning Chime Circuit Check
- Front Door Switch (Driver Side) Inspection
- Key Switch Insert Signal Inspection
- Lighting Switch Input Signal Inspection
- Seat Belt Buckle Switch Inspection
- Removal And Installation Of Warning Chime
- Vehicle Information And Integrated Switch System/Without Navigation System
- System Description
- Precautions For Av Control Unit Replacement
- Component Parts And Harness Connector Location
- Schematic
- Wiring Diagram - Inf/D
- Wiring Diagram - Comm
- Terminals And Reference Value For Av Control Unit
- Terminals And Reference Value For Display
- Terminals And Reference Value For MULTIFUNCTION Switch
- On Board Self-Diagnosis Function (Without Consult-II)
- Self-Diagnosis Mode
- Confirmation/Adjustment Mode
- Consult-II Function
- MULTIFUNCTION Switch Self-Diagnosis Function
- Power Supply And Ground Circuit Inspection For Av Control Unit
- Power Supply And Ground Circuit Inspection For Display
- Inspection Of MULTIFUNCTION Switch For Power Supply And Ground Circuit
- Vehicle Speed Signal Inspection
- Illumination Control Signal Inspection
- Ignition Signal Inspection
- RGB Screen Is Not Shown
- Color Of RGB Image Is Not Proper
- RGB Screen Is Rolling
- No A/C Display Is Shown
- No Fuel Information Is Displayed/No Warning Message Is Displayed
- A/C Operation Is Not Possible
- Vehicle Condition Setting Is Not Possible
- MULTIFUNCTION Switch Does Not Operate
- MULTIFUNCTION Switch Indicator Does Not Illuminate
- Removal And Installation Of Av Control Unit
- Removal And Installation Of Display
- Disassembly And Assembly For MULTIFUNCTION Switch
- Vehicle Information And Integrated Switch System/With Navigation System
- System Description
- Precautions For Av & NAVI Control Unit Replacement
- Component Parts & Harness Connector Location
- Schematic
- Wiring Diagram - Inf/D
- Terminals And Reference Value For Av And NAVI Control Unit
- Terminals And Reference Value For Display
- Terminals And Reference Value For MULTIFUNCTION Switch
- On Board Self-Diagnosis Function
- Self-Diagnosis Mode
- Confirmation/Adjustment Mode
- Consult-II Function
- MULTIFUNCTION Switch Self-Diagnosis Function
- Power Supply And Ground Circuit Check For Av And NAVI Control Unit
- Power Supply And Ground Circuit Inspection For Display
- Power Supply And Ground Circuit Inspection For MULTIFUNCTION Switch
- No Fuel Information Is Displayed/No Warning Message Is Displayed
- Vehicle Condition Setting Is Not Possible
- MULTIFUNCTION Switch Does Not Operate
- MULTIFUNCTION Switch Indicator Does Not Illuminate
- Removal And Installation Of Av And NAVI Control Unit
- Removal And Installation Of Display
- Disassembly And Assembly For MULTIFUNCTION Switch
- Clock
- Rear View Monitor
- System Description
- Component Parts & Harness Connector Location
- Schematic
- Wiring Diagram - R/View
- Terminals & Reference Value For Rear View Camera Control Unit
- Self-Diagnosis Function
- Self-Diagnosis Mode
- Confirmation/Adjustment Mode
- Side Distance Guideline Correction
- Power Supply And Ground Circuit Check
- Rear View Is Not Displayed With The A/T Selector Lever In R-Position
- The Backlight Correction Does Not Work When The Enter Switch Is Pressed
- The Rear View Image Is Distorted
- Removal And Installation Of Rear View Camera Control Unit
- Removal And Installation Of Rear View Camera
- Voice Activated Control System
- System Description
- Schematic
- Wiring Diagram - Voice
- Terminals & Reference Values For Voice Activated Control Module
- Component Parts & Harness Connector Location
- Trouble Diagnoses
- Self-Diagnosis Function
- Self-Diagnosis Mode
- Confirmation/Adjustment Mode
- Power Supply & Ground Circuit Inspection
- Voice Command Not Identified (With Voice Activated Control System In Operation)
- No Guide Sound Or Beeps
- Voice Activated Control System Not Starting PTT Switch Pushed On
- Audio Not Muted With PTT Switch Pushed On
- Audio Mute Not Released
- Removal And Installation For Voice Activated Control Module