FixVault
Home › Infiniti › 2008 › G37 Base › Repair and Diagnosis › External Pages › Different car › Section 34 (Transfer Case) › Precaution › Precautions › Precaution for Transfer Assembly and Transfer Control Unit Replacement › Method For Adjustment With 4WD Shift Switch At 2WD › Pattern A

Pattern A

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stop vehicle and move A/T selector lever to N position with brake pedal depressed. Stay in N for at least 2 seconds.
  2. Turn 4WD shift switch to 4LO position. Stay in 4LO for at least 2 seconds.
  3. Turn ignition switch OFF.
  4. Start engine.
  5. Erase self-diagnosis. Refer to , "CONSULT-III FUNCTION (ALL MODE AWD/4WD) ".
  6. Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to CHECK 4WD SHIFT INDICATOR PATTERN .

If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.

About FixVault