FixVault
Home › Infiniti › 2011 › M37 Base › Repair and Diagnosis › External Pages › Different car › Section 131 (LAN System (Can Gateway)) › Basic Inspection › Additional Service When Replacing Can Gateway › Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. SAVING VEHICLE SPECIFICATION

    With CONSULT: CONSULT Configuration

    Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "DESCRIPTION ".

    NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing CAN gateway.

    : GO TO 2.

  2. REPLACE CAN GATEWAY

    Replace CAN gateway. Refer to "REMOVAL AND INSTALLATION ".

    : GO TO 3.

  3. WRITING VEHICLE SPECIFICATION

    With CONSULT: CONSULT Configuration

    Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to "WORK PROCEDURE ".

    : WORK END

About FixVault