MEMORY FUNCTION : System Description: Notes
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- The driver seat control unit can store the optimum driving positions (seat, steering column, and door mirror position) for 2 people. If the driver seat position is changed, one-touch (pressing desired memory switch) operation allows changing to the other driving position.
- When seat memory switch (1 and 2) are operated, operation signal is transmitted to driver seat control unit.
- When driver seat control unit detects that seat memory switch is pressed for 0.5 seconds or more, driver seat control unit operates each motor of driver seat and detects the driver seat position according to signals transmitted from each sensor. Driver seat control unit requests the operation of tilt & telescopic motor and mirror motor to automatic drive positioner control unit via UART communication.
- Automatic drive positioner control unit operates tilt & telescopic motor, detects the steering column position according to signal transmitted from tilt & telescopic sensor, and transmits the detected steering column position to driver seat control unit.
- Automatic drive positioner control unit operates mirror motor, detects the door mirror position according to signal transmitted from mirror sensor, and transmits the detected door mirror position to driver seat control unit via UART communication.
- Driver seat control unit and automatic drive positioner control unit stops the operation of each motor when each part reaches the memorized positions.
- Driver seat control unit turns memory indicator lamp OFF that is blinking while each motor operates.NOTE: Further information for the memory storage procedure. Refer to "WORK PROCEDURE ".