FixVault

Component Inspection

  1. Ignition "OFF".
  2. Ignition "ON"
  3. Start and drive vehicle in gear and maintain vehicle speed is approx. 12 km/h or more (7.5 mph or more)
  4. Does warning lamp remain On?

    YES  : --> Substitute with a known-good HECU and check for proper operation. If problem is corrected, replace HECU and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO  : --> Fault is intermittent caused by faulty HECU or was repaired and HECU memory was not cleared. Go to the applicable troubleshooting procedure.