FixVault
Home › Kia › 2011 › Sorento Base, Automatic › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) › DBC Switch › Repair procedures › Inspection

Repair procedures: Inspection

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel. (Refer to CRASH PAD )
  3. Remove the lower crash pad switch assembly (A) after loosening the screws then disconnect the connectors.
    Fig 1: Identifying Lower Crash Pad Switch Assembly
    G07416097Courtesy of KIA MOTORS AMERICA, INC.
  4. Check the continuity between the switch terminals as the DBC switch is engaged.
    Fig 2: Terminals Continuity Chart
    G07416098Courtesy of KIA MOTORS AMERICA, INC.
About FixVault