Inspection Procedure
WARNING: This page is about a different car, the 2004 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT AFS ECU
- Disconnect the AFS ECU connector.
- Measure the resistance according to the value (s) in the figure Fig 1 below.
Standard:
- NG: Go to step 2
- OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (SEE PROBLEM SYMPTOMS TABLE )
- INSPECT AFS OFF SWITCH
- Disconnect the AFS OFF switch connector.
- Measure the resistance according to the value (s) in the figure Fig 3 below.
Standard:
- NG: REPLACE AFS OFF SWITCH
- OK: REPAIR OR REPLACE HARNESS OR CONNECTOR