FixVault
Home › Lexus › 2007 › GS 430 › Repair and Diagnosis › Accessories & Equipment › Infotainment › Navigation › Navigation Antenna › Installation

Navigation Antenna: Installation

  1. INSTALL NAVIGATION ANTENNA 
    1. Install the navigation antenna with the 3 screws and attach the 4 clips.
      Fig 1: Installing Navigation Antenna
      G05299909Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 HEATER TO REGISTER DUCT (See  REASSEMBLY  ) 
  3. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT (See  INSTALLATION  ) 
  4. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See  INSTALLATION  ) 
  5. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (See  INSTALLATION  ) 
  6. INSTALL FRONT PILLAR GARNISH LH (See  INSTALLATION  ) 
  7. INSTALL FRONT PILLAR GARNISH RH (See  INSTALLATION  ) 
  8. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY (See  INSTALLATION  ) 
  9. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See  INSTALLATION  ) 
  10. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  INSTALLATION  ) 
  11. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (See  INSTALLATION  ) 
  12. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (See  INSTALLATION  ) 
  13. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See  INSTALLATION  ) 
  14. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  INSTALLATION  ) 
  15. INSTALL INSTRUMENT SIDE PANEL LH (See  INSTALLATION  ) 
  16. INSTALL INSTRUMENT SIDE PANEL RH (See  INSTALLATION  ) 
  17. INSTALL COMBINATION METER ASSEMBLY (See  INSTALLATION  ) 
  18. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (See  INSTALLATION  ) 
  19. INSTALL CONSOLE BOX (See  INSTALLATION  ) 
  20. INSTALL CONSOLE BOX REGISTER ASSEMBLY (See  INSTALLATION  ) 
  21. INSTALL CONSOLE BOX PLATE (See  INSTALLATION  ) 
  22. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See  INSTALLATION  ) 
  23. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See  INSTALLATION  ) 
  24. INSTALL CONSOLE UPPER PANEL ASSEMBLY (See  INSTALLATION  ) 
  25. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (See  INSTALLATION  ) 
  26. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY (See  INSPECTION  ) 
  27. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY (See  INSTALLATION  ) 
  28. INSTALL SPIRAL CABLE WITH STEERING SENSOR (See  INSTALLATION  ) 
  29. INSTALL STEERING COLUMN COVER (See  INSTALLATION  ) 
  30. INSTALL STEERING WHEEL ASSEMBLY (See  INSTALLATION  ) 
  31. INSTALL STEERING PAD (See  INSTALLATION  ) 
  32. INSTALL NO. 2 STEERING WHEEL COVER LOWER 
  33. INSTALL NO. 3 STEERING WHEEL COVER LOWER 
  34. INSTALL FRONT DOOR OPENING TRIM COVER LH (See  INSTALLATION  ) 
  35. INSTALL FRONT DOOR OPENING TRIM COVER RH (See  INSTALLATION  ) 
  36. INSTALL FRONT DOOR SCUFF PLATE LH (See  INSTALLATION  ) 
  37. INSTALL FRONT DOOR SCUFF PLATE RH (See  INSTALLATION  ) 
  38. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  39. PERFORM INITIALIZATION 
    1. Perform initialization (See INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  40. CHECK SRS WARNING LIGHT 
    1. Check SRS warning light (See AIRBAG SYSTEM ).
About FixVault