FixVault
Home › Lexus › 2007 › GS 430 › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Air Conditioning › Room Temperature Sensor › Installation

Room Temperature Sensor: Installation

  1. INSTALL ROOM TEMPERATURE SENSOR 
    1. Install the sensor with the claw.
    2. Connect the connector and attach the air hose.
    Fig 1: Locating Room Temperature Sensor Connector And Air Hose
    G05297962Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY (See  INSTALLATION  ) 
  3. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (See  INSTALLATION  ) 
  4. INSTALL INSTRUMENT PANEL NO. 1 SAFETY PAD SUB-ASSEMBLY (See  INSTALLATION  ) 
  5. INSTALL INSTRUMENT SIDE PANEL LH (See  INSTALLATION  ) 
  6. INSTALL FRONT DOOR OPENING TRIM COVER LH (See  INSTALLATION  ) 
  7. INSTALL FRONT DOOR SCUFF PLATE LH (See  INSTALLATION  ) 
  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See  INSTALLATION  ) 
  9. INSTALL CONSOLE UPPER PANEL ASSEMBLY (See  INSTALLATION  ) 
  10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (See  INSTALLATION  ) 
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
About FixVault