FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › External Pages › Different car › Section 80 (Lighting) › License Plate Light Assembly › Installation

License Plate Light Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
    1. Engage the 2 claws and install the license plate light assembly.
    2. Connect the connector.
      Fig 1: Identifying License Plate Light Assembly Claws
      G05252455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/ Rear View Monitor System)  (See INSTALLATION )
  4. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)  (See INSTALLATION )
  5. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY  (See INSTALLATION )
  6. INSTALL REAR LIGHT ASSEMBLY LH (See  INSTALLATION   ) 
  7. INSTALL REAR LIGHT ASSEMBLY RH 

    HINT:

    Use the same procedures for the RH side and the LH side.

  8. INSTALL LUGGAGE COMPARTMENT DOOR COVER  (See INSTALLATION )
  9. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  (See INSTALLATION )
  10. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE  (See INSTALLATION )
  11. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )
About FixVault