FixVault
Home › Lexus › 2008 › IS 350 › Repair and Diagnosis › Electrical › Gauges › Meter › Light Control Rheostat › Installation

Light Control Rheostat: Installation

  1. INSTALL LIGHT CONTROL RHEOSTAT 
    1. Engage the 2 claws and install the light control rheostat.
      Fig 1: Engaging Claws
      G05320848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the finish panel No. 2 retainer with switch with the 3 screws.
    Fig 2: Locating Screws And Finish Panel No. 2 Retainer With Switch
    G05320845Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  4. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  5. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination)  (See INSTALLATION )
  6. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination)  (See INSTALLATION )
About FixVault