FixVault
Home › Lexus › 2008 › IS F › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle › Air Cooled Oil Cooler › Installation

Air Cooled Oil Cooler: Installation

  1. INSTALL OIL COOLER ASSEMBLY 
    1. Install the oil cooler assembly to the oil cooler bracket with the 3 bolts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the 2 oil cooler hoses to the oil cooler assembly.
      3. Fig 1: Locating Oil Cooler Assembly Bolts
      G05750913Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT BUMPER ASSEMBLY  (See INSTALLATION )
  3. INSTALL RADIATOR GRILLE PROTECTOR  (See INSTALLATION )
  4. INSTALL HIGH PITCHED HORN  (See INSTALLATION )
  5. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  6. ADD WASHER FLUID (w/ Headlight Cleaner System)  (See INSTALLATION )
  7. VEHICLE PREPARATION FOR FOG LIGHT AIMING  (See ADJUSTMENT )
  8. PREPARATION FOR FOG LIGHT AIMING  (See ADJUSTMENT )
  9. INSPECT FOG LIGHT AIMING  (See ADJUSTMENT )
  10. ADJUST FOG LIGHT AIMING  (See ADJUSTMENT )
  11. ADD AUTOMATIC TRANSMISSION FLUID 
    1. Add automatic transmission fluid (See AUTOMATIC TRANSMISSION FLUID  ).
  12. INSTALL NO. 2 ENGINE UNDER COVER 
About FixVault