Ignition Coil: Removal

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE V-BANK COVER (See REMOVAL )
REMOVE INTAKE AIR CONNECTOR PIPE (See REMOVAL )
REMOVE IGNITION COIL ASSEMBLY
1. Disconnect the ignition coil connector.
2. Remove the bolt and pull out the ignition coil.
  
  Fig 1: Locating Ignition Coil Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002