High Intensity Discharge Headlight Bulb: Installation

INSTALL DISCHARGE HEADLIGHT BULB
1. Lock the set spring and install the discharge headlight bulb.
  NOTE: Do not touch the glass part of the bulb.
  
  Fig 1: Releasing Set Spring Lock
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Turn the headlight control ECU in the direction indicated by the arrow and install the socket.
  NOTE: Install the socket so that the wire harness is pointed downwards.
3. Turn the back cover in the direction indicated by the arrow and install it.
  
  Fig 2: Turning Back Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT FENDER LINER LH
1. Install the front fender liner LH with the 7 screws and 5 clips.
Fig 3: Identifying Front Fender Liner LH Screws And Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT WHEEL OPENING EXTENSION PAD LH (See INSTALLATION )
INSTALL FRONT FENDER WHEEL OPENING MOLDING LH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
PERFORM INITIALIZATION
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.