FixVault
Home › Mazda › 2007 › 6 Mazdaspeed › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Power Systems › Ignition Switch Removal/Installation

Ignition Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION. )
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: View Of Ignition Switch & Components
    G04327706Courtesy of MAZDA MOTORS CORP.
About FixVault