FixVault
Home › Mazda › 2009 › CX-7 Touring, 2.3 L, FWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Card Key Id Code Registration [Advanced Keyless And Start System] › Using M-MDS

Using M-MDS

  1. Fully lower the driver-side door glass.
  2. Connect the M-MDS to the DLC-2.
    3. Fig 1: Identifying DLC-2 Connector
    G04861159Courtesy of MAZDA MOTORS CORP.
  3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
    CAUTION:
    • Protect the cable and body contact area with a clean rag, otherwise they could be damaged.
  4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (notebook PC)
      1. Select "Body".
      2. Select "Security".
      3. Select "PATS Functions".
    • When using the PDS (pocket PC)
      1. Select "Programming".
      2. Select "PATS Functions".
  5. Then, select an item from the screen menu.
    1. Select the "Program Additional card key".
  6. Perform the security access according to the directions on the M-MDS screen. (See SECURITY ACCESS PROCEDURE .)
  7. The security access is initiated and the M-MDS displays "Acquire security access".
    NOTE:
    • When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times  will change the "OUT-CODE".
  8. Follow the instructions on the M-MDS screen, obtain the "Incode" that corresponds to the "Outcode".
  9. Input the "Incode" that corresponds to the "Outcode" displayed on the M-MDS screen.
    NOTE:
    • After Step 9 is completed and the additional advanced key programming is activated, the door lock actuator operates to lock, and then operates to unlock.
  10. Press UNLOCK button of the unprogrammed advanced key 2 times while in the vehicle.
    NOTE:
    • After Step 10 is completed and the advanced key is programmed, the door lock actuator operates to lock, and then operates to unlock.
  11. If additional advanced keys are to be programmed, go to the advanced key programming mode according to the instructions on the M-MDS screen.
About FixVault