Keyless Control Module Removal/Installation [Advanced Keyless Entry And Start System]

If the keyless control module is replaced, always perform the following procedure.
- Keyless Control Module Configuration (See KEYLESS CONTROL MODULE CONFIGURATION [ADVANCED KEYLESS ENTRY AND START SYSTEM] .)
- Immobilizer System-related Parts Programming [No. 6 Programming Procedure Due to Keyless Control Module Replacement] (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING {ADVANCED KEYLESS ENTRY AND START SYSTEM} .)
Disconnect the negative battery cable.
Remove the front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION ).
Disconnect the keyless control module connector.

Fig 1: Keyless Control Module Replacement Components With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

Remove the bolt, then remove the keyless control module.
Install in the reverse order of removal.

Fig 2: Identifying Keyless Control Module Connector
Courtesy of MAZDA MOTORS CORP.