Keyless Beeper Inspection [Advanced Keyless Entry And Push Button Start System]

1. Disconnect the negative battery cable.
2. Remove the keyless beeper. (See KEYLESS BEEPER REMOVAL/INSTALLATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)
3. Apply battery positive voltage and connect the ground to each terminal and verify the keyless beeper sound operation.

• If the beep sound cannot be verified, replace the keyless beeper.

Fig 1: Inspecting Keyless Beeper (Advanced Keyless Entry And Push Button Start System)

Courtesy of MAZDA MOTORS CORP.