Washer Fluid-Level Sensor Inspection

Disconnect the negative battery terminal. (Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Remove the front bumper. (Refer to FRONT BUMPER REMOVAL .) (Refer to FRONT BUMPER INSTALLATION .)
Disconnect the connector. (Refer to WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)
Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.

Fig 1: Washer Fluid Level Sensor Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Washer Fluid Level Sensor Circuit
Courtesy of MAZDA MOTORS CORP.
- If not as indicated in the table, replace the washer fluid-level sensor. (Refer to WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)