FixVault
Home › Mazda › 2018 › CX-3 Touring, FWD › Repair and Diagnosis (Single Page) › Brakes › Parking Brake System › Electric Parking Brake Control Module Inspection › Notes

Electric Parking Brake Control Module Inspection: Notes

  1. Disconnect the electric parking brake control module connector. (See ELECTRIC PARKING BRAKE CONTROL MODULE REMOVAL/INSTALLATION .)
  2. Attach the tester lead to the electric parking brake control module wiring harness-side connector and inspect voltage or continuity according to the Terminal Voltage Table (Reference) on the table.
About FixVault