Keyless Receiver Inspection: Notes
- Disconnect the negative battery terminal.
- (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Remove the keyless receiver with the connector still connected.
- (See KEYLESS RECEIVER REMOVAL/INSTALLATION .)
- Connect the negative battery terminal.
- (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (See Terminal Voltage Table (Reference) ).
- If the voltage is not as specified in the terminal voltage table (See TERMINAL VOLTAGE TABLE (REFERENCE) ), inspect the parts under Inspection item(s) and related wiring harnesses.
- If the system does not operate normally even though the parts under Inspection Item(s) and related wiring harnesses do not have any malfunction, replace the keyless receiver.
- If the voltage is not as specified in the terminal voltage table (See TERMINAL VOLTAGE TABLE (REFERENCE) ), inspect the parts under Inspection item(s) and related wiring harnesses.