Front Suspension & Wheel Alignment

• General Description
  • Notes
  • Construction Diagram
• Front Suspension Diagnosis
  • Introduction To Front Suspension Diagnosis
  • Troubleshooting Strategy
  • Symptom Chart
  • Symptom Procedures
    • INSPECTION PROCEDURE 1: Steering Wheel is Heavy, Vibrates or Pulls to One Side
      • Diagnosis
    • INSPECTION PROCEDURE 2: Excessive Body Rolling
      • Diagnosis
    • INSPECTION PROCEDURE 3: Poor Ride
      • Diagnosis
    • INSPECTION PROCEDURE 4: Unequal Ride Height
      • Diagnosis
    • INSPECTION PROCEDURE 5: Noise
      • Diagnosis
• Special Tools
• On-Vehicle Service
  • Front Wheel Alignment Check And Adjustment
    • Notes
    • Toe-In
    • Steering Angle
    • Camber And Caster
      • Notes
      • Camber and caster reference table
        • How to read this table (example)
  • Upper Arm Ball Joint End Play Check
  • Ball Joint Dust Cover Check
• Upper Arm Assembly
  • Removal And Installation
    • Notes
    • Removal Service Point
      • << A >> Upper Arm Ball Joint And Knuckle Disconnection
    • Installation Service Point
      • >> A << Upper Arm Ball Joint And Knuckle Connection
  • Inspection
    • Notes
    • Upper Arm Ball Joint Turning Torque Check
    • Upper Arm Ball Joint Dust Cover Check
• Shock Absorber Assembly
  • Removal And Installation
  • Disassembly And Assembly
    • Notes
    • Disassembly Service Point
      • << A >> Self-Locking Nut Removal
    • Assembly Service Points
      • << A >> Self-Locking Nut Installation
      • << B >> Spring Bracket Assembly Installation
      • << C >> Self-Locking Nut Installation
• Lower Arm
  • Removal And Installation
    • Notes
    • Removal Service Points
      • << A >> Tie Rod End And Knuckle Assembly/Lower Arm Ball Joint And Knuckle Assembly Disconnection
      • << B >> Lower Arm Mounting Bolt Removal
    • Installation Service Point
      • << A >> Upper Arm Ball Joint And Knuckle Connection
  • Inspection
    • Notes
    • Lower Arm Ball Joint Turning Torque Check
    • Lower Arm Ball Joint Dust Cover Check
  • Lower Arm Ball Joint Dust Cover Replacement
• Stabilizer Bar
  • Removal And Installation
    • Notes
    • Installation Service Points
      • << A >> Stabilizer Bar Bushing Installation
      • << B >> Stabilizer Clamp Installation
  • Inspection
    • Notes
    • Stabilizer Link Ball Joint Turning Torque Check
    • Stabilizer Link Ball Joint Dust Cover Check
  • Stabilizer Link Ball Joint Dust Cover Replacement
• Specifications
  • Fastener Tightening Specifications
  • General Specifications
    • Coil Spring
  • Service Specifications