Scan Tool Or Voltmeter
If a problem is found in the Pulse Check, observe the table below.
SCAN TOOL OR VOLTMETER
| SYMPTOM | INSPECTION PROCEDURE | |
|---|---|---|
| ETACS-ECU does not receive any signal from the key reminder switch. | P-1 | |
| ETACS-ECU does not receive any signal from the hazard warning light switch. | P-2 | |
| ETACS-ECU does not receive any signal from all the door switches. | P-3 | |
| ETACS-ECU does not receive any signal from the liftgate latch. | P-4 | |
| ETACS-ECU does not receive any signal from the glass hatch latch. | P-5 | |
| ETACS-ECU does not receive any signal from the door lock key cylinder switch. | P-6 | |
| ETACS-ECU does not receive any signal from the front or rear door lock actuator. | P-7 | |
| ETACS-ECU does not receive any signal from the door lock switch (incorporated in the power window main switch and front power window sub switch). | P-8 | |
| ETACS-ECU does not receive an auto-stop signal from the rear wiper motor. | P-9 | |
| ETACS-ECU does not receive any signal from the hood switch. | P-10 | |
| The liftgate handle signal is not sent to the ETACS-ECU. | P-11 | |
| The glass hatch handle signal is not sent to the ETACS-ECU. | P-12 | |
| The interior light "on" or "off" switch signal is not sent to the ETACS-ECU. | P-13 | |
| Transmitter | ETACS-ECU does not receive any signal from the lock, unlock or panic switch. | P-14 |
| ETACS-ECU does not receive any interior light loaded signal. | P-15 | |