Simplified Wiring System
- General Description
- Special Tool
- SWS Diagnosis
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- DTC 001: Trouble In SWS Communication Line Or ETACS-Ecu
- DTC 002: Trouble In Column Switch
- DTC 003: Trouble In Front-Ecu
- DTC 004: Trouble In Sunroof-Ecu
- DTC 010: Bus Off
- DTC 011: Powertrain Control Module Time-Out (Related To Engine); DTC 012: Powertrain Control Module Time-Out (Related To A/T)
- DTC 013: A/C-Ecu Time-Out
- DTC 014: Combination Meter Time-Out
- DTC 015: Multi-Center Display Unit (Middle Grade Type) Time-Out
- DTC 021: Failure Information On Combination Meter
- Symptom Chart
- Input Signal Chart
- Symptom Procedures
- Inspection Procedure A-1: Communication With The SWS Monitor Kit Is Not Possible
- Inspection Procedure A-2: Communication With The Column Switch (Column-Ecu) Is Not Possible
- Inspection Procedure A-3: Communication With The ETACS-Ecu Is Not Possible
- Inspection Procedure A-4: Communication With The Front-Ecu Is Not Possible
- Inspection Procedure A-5: Communication With The Sunroof-Ecu Is Not Possible
- Tone Alarm
- General Description Concerning The Tone Alarm Function
- General Circuit Diagram For Ignition Key Reminder Tone Alarm Function
- General Circuit Diagram For Light Reminder Tone Alarm Function
- General Circuit Diagram For Seat Belt Tone Alarm Function
- Inspection Procedure B-1: Tone Alarm: Ignition Key Reminder Tone Alarm Function Does Not Work Normally
- Inspection Procedure B-2: Tone Alarm: Light Reminder Tone Alarm Function Does Not Work Normally
- Inspection Procedure B-3: Tone Alarm: Seat Belt Tone Alarm Function Does Not Work Normally
- Inspection Procedure B-4: Tone Alarm: Door-Ajar Warning Buzzer Function Does Not Work Normally
- Inspection Procedure B-5: Tone Alarm: The Multi-Center Display Does Not Sound Normally When It Is Operated < Multi-Center Display (Middle-Grade Type) >
- Inspection Procedure B-6: Tone Alarm: Turn-Signal Light Buzzer Function Does Not Work Normally
- Central Door Locking System
- General Description Concerning Central Door Locking System
- Central Door Locking System
- Door Unlocking By Operating The Driver's Door Lock Key Cylinder
- Door Locking Or Unlocking By Operating The Driver's Or Front Passenger's Door Lock Switch
- Liftgate And Glass Hatch
- Forgotten Key Prevention Function
- If The Front Passenger's Door Is Open When It Is Locked With The Driver's Door Switch
- General Circuit Diagram For The Central Door Locking System
- Inspection Procedure C-1: Central Door Locking System: The Central Door Locking System Does Not Work At All
- Inspection Procedure C-2: Central Door Locking System: Some Doors Do Not Lock Or Unlock (Except Liftgate And Glass Hatch Lock)
- Inspection Procedure C-3: Central Door Locking System: The Liftgate And/Or The Glass Hatch Lock Does Not Work
- Inspection Procedure C-4: Central Door Locking System: All The Doors Do Not Lock Or Unlock With Just The Door Lock Switch Operation
- Inspection Procedure C-5: Central Door Locking System: All The Doors Do Not Lock Or Unlock With Just The Door Lock Key Cylinder Key Operation
- Inspection Procedure C-6: Central Door Locking System: All The Doors Do Not Lock Or Unlock With Just The Driver's Or Front Passenger's Inside Lock Knob Operation
- Inspection Procedure C-7: Central Door Locking System: Forgotten Key Prevention Function Does Not Work Normally
- Power Windows
- General Description Concerning The Power Windows
- Power Window Main Switch Function
- Power Window Sub Switch Function
- General Circuit Diagram For The Power Windows
- Inspection Procedure D-1: Power Windows: Power Windows Do Not Work At All
- Inspection Procedure D-2: Power Windows: The Power Window Timer Function Does Not Work Normally
- Inspection Procedure D-3: Power Windows: Only The Front Door Window (LH) Does Not Work Normally By Operating The Power Window Main Switch
- Inspection Procedure D-4: Power Windows: Power Windows Do Not Work Normally By Operating The Passenger's Power Window Sub Switches
- Inspection Procedure D-5: Power Windows: Front Or Rear Passenger's Power Windows Do Not Work At All By Operating The Power Window Main Switch
- Keyless Entry System
- General Description Concerning The Keyless Entry System
- All Door Lock Function
- Driver's Door Unlock Function
- All Door Unlock Function
- Keyless Entry Hazard ANSWERBACK And Horn ANSWERBACK Function
- General Circuit Diagram For The Keyless Entry System
- Inspection Procedure E-1: Keyless Entry System: Keyless Entry System Does Not Operate
- Inspection Procedure E-2: Keyless Entry System: The Dome Light, The Turn-Signal Lights And The Horn Do Not Operate Through The ANSWERBACK Function
- Inspection Procedure E-3: Keyless Entry System: Encrypted Code Cannot Be Registered
- Sunroof
- General Description Concerning The Sunroof
- General Circuit Diagram Regarding The Sunroof
- Inspection Procedure F-1: Sunroof: Sunroof Does Not Operate
- Inspection Procedure F-2: Sunroof: Any Of The Sunroof Switch Positions Is Defective
- Inspection Procedure F-3: Sunroof: Sunroof Timer Function Does Not Work Normally
- Inspection Procedure F-4: Sunroof: Safety Mechanism Does Not Function
- Windshield Wiper And Washer
- General Description Concerning The Windshield Wiper And Washer
- Windshield Wiper And Washer Control Function
- General Circuit Diagram For The Windshield Wiper And Washer
- Inspection Procedure G-1: Windshield Wiper And Washer: The Windshield Wiper Does Not Work At All
- Inspection Procedure G-2: Windshield Wiper And Washer: The Windshield Wipers Do Not Work When The Windshield Wiper Switch Is At "Int" Or "Mist" Position Or The Windshield Washer Switch Is At "On" Position. However, The Wipers Work At Low Speed When The Windshield Wiper Switch Is At "Lo" Or "Hi"
- Inspection Procedure G-3: Windshield Wiper And Washer: All Of The Windshield Wiper Switch Positions Are Defective
- Inspection Procedure G-4: Windshield Wiper And Washer: The Windshield Wipers Does Not Stop At The Predetermined Park Position
- Inspection Procedure G-5: Windshield Wiper And Washer: The Windshield Intermittent Wiper Interval Cannot Be Adjusted By Using The Variable Intermittent Wiper Control Switch
- Inspection Procedure G-6: Windshield Wiper And Washer: The Windshield Intermittent Wiper Interval Does Not Change According To The Vehicle Speed
- Inspection Procedure G-7: Windshield Wiper And Washer: The Windshield Washer Does Not Work
- Rear Wiper And Washer
- General Description Concerning The Rear Wiper And Washer
- Rear Wiper And Washer Control Function
- General Circuit Diagram For Rear Wiper And Washer
- Inspection Procedure H-1: Rear Wiper And Washer: Rear Wiper Does Not Work At All
- Inspection Procedure H-2: Rear Wiper And Washer: Rear Wiper Does Not Stop At The Predetermined Park Position
- Inspection Procedure H-3: Rear Wiper And Washer: When The Selector Lever Is Moved To "R" Position During The Rear Wiper Operation, The Rear Wiper Does Not Operate Continuously
- Inspection Procedure H-4: Rear Wiper And Washer: Rear Washer Does Not Operate
- Headlight And Taillight
- General Description Concerning The Headlight And Taillight
- Taillights And Headlights Illumination
- General Circuit Diagram For The Taillights
- General Circuit Diagram For The Headlights
- Inspection Procedure I-1: Headlight And Taillight: The Taillights Do Not Illuminate Normally
- Inspection Procedure I-2: Headlight And Taillight: The Headlights (Low-Beam) Do Not Illuminate Normally
- Inspection Procedure I-3: Headlight And Taillight: The Headlights (High-Beam) Do Not Illuminate Normally
- Inspection Procedure I-4: Headlight And Taillight: When The Passing Switch Is Turned "On," The Headlights (Low-Beam Or High-Beam) Do Not Illuminate
- Inspection Procedure I-5: Headlight And Taillight: Headlights Do Not Illuminate When The Lighting Switch Is At "Tail" And "Passing" Position, But Illuminate At Low-Beam When The Switch Is At "Head" Position. At This Position, The Headlights Cannot Be Changed To High Beam By Operating The Dimmer Switch
- Inspection Procedure I-6: Headlight And Taillight: The Taillights, The Side Markers Or The License Plate Lights Do Not Illuminate
- Inspection Procedure I-7: Headlight And Taillight: One Of The Headlights Does Not Illuminate
- Inspection Procedure I-8: Headlight And Taillight: The High-Beam Indicator Light Does Not Illuminate
- Inspection Procedure I-9: Headlight And Taillight: Headlight Automatic Shutdown Function Does Not Work Normally
- Inspection Procedure I-10: Headlight And Taillight: Headlight Dimmer Switch Automatic Resetting Function Does Not Work Normally
- Inspection Procedure I-11: Headlight And Taillight: Daytime Running Light Function Does Not Work Normally < Vehicles For CANADA >
- Flasher Timer
- General Description Concerning The Flasher Timer
- General Circuit Diagram For The Turn Signal Light And Hazard Light
- Inspection Procedure J-1: Flasher Timer: Turn-Signal Lights Do Not Flash When The Turn-Signal Light Switch Is Turned On
- Inspection Procedure J-2: Flasher Timer: Hazard Warning Lights Do Not Flash When The Hazard Warning Light Switch Is Turned On
- Inspection Procedure J-3: Flasher Timer: The Right Or Left Turn-Signal Light Does Not Illuminate
- Inspection Procedure J-4: Flasher Timer: The Turn-Signal Light Indicator Does Not Illuminate Normally
- Fog Light
- General Description Concerning The Fog Lights
- General Circuit Diagram For The FOGLIGHTS
- Inspection Procedure K-1: Fog Light: Fog Lights Do Not Illuminate When The Fog Light Switch Is Turned On
- Inspection Procedure K-2: Fog Light: Fog Lights Do Not Go Out When The Headlights (Low-Beam) Are Turned Off While The Fog Lights Are On
- Inspection Procedure K-3: Fog Light: One Of The Fog Lights Does Not Illuminate
- Inspection Procedure K-4: Fog Light: The Fog Light Indicator Does Not Illuminate Normally
- Interior Light
- General Description Concerning The Interior Light
- General Circuit Diagram For Interior Lights
- Inspection Procedure L-1: Interior Light: The Dome Light Does Not Illuminate And Go Out Normally
- Inspection Procedure L-2: Interior Light: The Dome Lights, Map Lights, Rear Personal Lights, Cargo Area Light Or Front Door Lights Do Not Illuminate Or Go Out Normally
- Inspection Procedure L-3: Interior Light: Dome Light Dimming Function Does Not Work Normally
- Inspection Procedure L-4: Interior Light: The Ignition Key Hole Illumination Light Does Not Illuminate Or Go Out Normally
- Inspection Procedure L-5: Interior Light: The Interior Light Automatic Shutdown Function Does Not Work Normally
- Inspection Procedure L-6: Interior Light: The Door Ajar Indicator Lights Do Not Illuminate Or Go Out Normally
- Inspection Procedure L-7: Interior Light: When The Interior Light "On" Or "Off" Switch Is Operated, The Dome Lights Do Not Illuminate Or Go Out Normally
- Inspection Procedure L-8: Interior Light: The Seat Belt Warning Light Do Not Illuminate Or Go Out Normally
- Theft-Alarm System
- General Description Concerning The Theft-Alarm System
- General Circuit Diagram For The Theft-Alarm
- Inspection Procedure M-1: Theft-Alarm System: Theft-Alarm System Is Not Armed (Theft-Alarm Indicator Light Does Not Illuminate)
- Inspection Procedure M-2: Theft-Alarm System: Horn Does Not Sound When The Theft-Alarm Is Triggered
- Inspection Procedure M-3: Theft-Alarm System: Headlights (High-Beam) Do Not Flash When The Theft-Alarm System Is Triggered
- Inspection Procedure M-4: Theft-Alarm System: Panic Alarm Function Does Not Work
- Inspection Procedure N-1: It Is Not Possible To Customize The Functions By Operating The Multi-Center Display (Middle-Grade Type)
- Input Signal Procedures
- Inspection Procedure O-1: ETACS-Ecu Does Not Receive Any Signal From The Ignition Switch (Acc)
- Inspection Procedure O-2: ETACS-Ecu Does Not Receive Any Signal From The Ignition Switch (IG1)
- Inspection Procedure O-3: ETACS-Ecu Does Not Receive Any Signal From The Fog Light Switch
- Inspection Procedure O-4: ETACS-Ecu Does Not Receive Any Signal From The Driver's Or The Front Passenger's Door Switch
- Inspection Procedure O-5: Column Switch: ETACS-Ecu Does Not Receive Any Signal From The Taillight Switch, The Headlight Switch, The Passing Switch, The Dimmer Switch Or The Turn-Signal Light Switch
- Inspection Procedure O-6: Column Switch: ETACS-Ecu Does Not Receive Any Signal From The Windshield Mist Wiper Switch, The Windshield Intermittent Wiper Switch, The Windshield Low-Speed Wiper Switch, The Windshield High-Speed Wiper Switch, The Rear Wiper Switch, The Windshield Washer Switch Or The Rear Washer Switch
- Inspection Procedure O-7: Column Switch: ETACS-Ecu Does Not Receive Any Signal From The Variable Intermittent Wiper Control Switch
- Inspection Procedure O-8: Sunroof Switch: ETACS-Ecu Does Not Receive Any Signal From The Up, Open Or Close/Down Switch
- Inspection Procedure P-1: ETACS-Ecu Does Not Receive Any Signal From The Key Reminder Switch
- Inspection Procedure P-2: ETACS-Ecu Does Not Receive Any Signal From The Hazard Warning Light Switch
- Inspection Procedure P-3: ETACS-Ecu Does Not Receive Any Signal From All The Door Switches
- Inspection Procedure P-4: ETACS-Ecu Does Not Receive Any Signal From The Liftgate Latch
- Inspection Procedure P-5: ETACS-Ecu Does Not Receive Any Signal From The Glass Hatch Latch
- Inspection Procedure P-6: ETACS-Ecu Does Not Receive Any Signal From The Door Lock Key Cylinder Switch
- Inspection Procedure P-7: ETACS-Ecu Does Not Receive Any Signal From The Front Or Rear Door Lock Actuator
- Inspection Procedure P-8: ETACS-Ecu Does Not Receive Any Signal From The Door Lock Switch (Incorporated In The Power Window Main Switch And Front Power Window Sub Switch)
- Inspection Procedure P-9: ETACS-Ecu Does Not Receive An Auto-Stop Signal From The Rear Wiper Motor
- Inspection Procedure P-10: ETACS-Ecu Does Not Receive Any Signal From The Hood Switch
- Inspection Procedure P-11: The Liftgate Handle Signal Is Not Sent To The ETACS-Ecu
- Inspection Procedure P-12: The Glass Hatch Handle Signal Is Not Sent To The ETACS-Ecu
- Inspection Procedure P-13: The Interior Light "On" Or "Off" Switch Signal Is Not Sent To The ETACS-Ecu
- Inspection Procedure P-14: Transmitter: ETACS-Ecu Does Not Receive Any Signal From The Lock, Unlock Or Panic Switch
- Inspection Procedure P-15: ETACS-Ecu Does Not Receive Any Interior Light Loaded Signal
- Check At Ecu Terminal
- On-Vehicle Service