Data List Reference Table
WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
| Item No. |
Scan tool (M.U.T.-IIISE) display |
Condition |
Normal condition |
| 7001 |
RLS IG1 |
When the electric motor switch is turned to the ACC position. |
OFF |
| When the electric motor switch is turned to the ON or START position. |
ON |
| 7002 |
RLS Light sensor sensitivity |
When the customize value of the lighting control sensor sensitivity is set to level 1 (quick). |
Level 1 bright |
| When the customize value of the lighting control sensor sensitivity is set to level 2 (slightly quick). |
Level 2 bright |
| When the customize value of the lighting control sensor sensitivity is set to level 3 (normal). |
Level 3 |
| When the customize value of the lighting control sensor sensitivity is set to level 4 (slightly slow). |
Level 4 dark |
| When the customize value of the lighting control sensor sensitivity is set to level 5 (slow). |
Level 5 dark |
| 7004 |
RLS Radio ACC |
When the electric motor switch is turned to the START position. |
OFF |
| When the electric motor switch is turned to the ACC or ON position. |
ON |
| 7007 |
RLS Vehicle speed |
Perform a test run of the vehicle. |
The values displayed on the speedometer and scan tool (M.U.T.-IIISE) are almost the same. |
| 7009 |
RLS Low beam "ON" request |
When the area around the lighting control sensor is bright. |
OFF |
| When the area around the lighting control sensor is dark. |
ON |
| Item No. |
Scan tool (M.U.T.-IIISE) display |
Condition |
Normal condition |
| 7010 |
RLS judgment illuminance output |
When the area around the lighting control sensor has become bright from dark |
The value displayed on the scan tool (M.U.T.-IIISE) becomes large. |
| When the area around the lighting control sensor has become dark from bright. |
The value displayed on the scan tool (M.U.T.-IIISE) becomes small. |
| 7011 |
RLS Tail light "ON" request |
When the area around the lighting control sensor is bright. |
OFF |
| When the area around the lighting control sensor is dark. |
ON |
| 7012 |
RLS Tunnel detect output |
When the area around the lighting control sensor is bright. |
OFF |
| When the area around the lighting control sensor is dark. |
ON |
| 7014 |
RLS Specification |
- |
EU |
| 7015 |
RLS ECU Diagnostic version |
- |
- |
| 7016 |
RLS ECU Hardware version |
- |
- |
| 7017 |
RLS ECU Software version |
- |
- |
| 7018 |
RLS ECU Part number |
- |
- |
| 7019 |
RLS ECU Serial number |
- |
- |