FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 212 (Air Bag Restraint Systems) › Diagnostics › Clearing Codes › Using Consult Tester

Using Consult Tester

WARNING: This page is about a different car, the 2003 Infiniti QX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. After repairing system, connect both battery cables. Connect CONSULT tester to Data Link Connector (DLC), located under left side of instrument panel. See Figure . Turn ignition on. Touch START (NISSAN BASED VHCL). Touch AIRBAG. Touch SELF-DIAG (CURRENT). If no malfunction is detected, repair is complete. Touch ERASE to erase code retained in memory. Go to next step. If fault message is displayed, either the malfunction has not been repaired or another malfunction is detected. Go to CURRENT CODES USING CONSULT TESTER  .
  2. Touch BACK until SELECT SYSTEM is displayed. Touch SELF DIAG (PAST). Ensure no self-diagnostic fault message is present. Touch BACK until SELECT SYSTEM appears. Turn ignition off. Turn off CONSULT tester. Disconnect CONSULT tester from DLC.
About FixVault