Additional Service When Replacing Abs Actuator And Electric Unit (Control Unit): Description

Perform the following operations when replacing ABS actuator and electric unit (control unit). For details, refer to Work Procedure .

AFTER REPLACEMENT 

After replacing the ABS actuator and electric unit (control unit), the following items must be performed:

• ABS actuator and electric unit (control unit) programming
• ABS actuator and electric unit (control unit) configuration
• Air bleeding of brake fluid
• Adjust the neutral position of steering angle sensor
• Calibration of the decel G sensor
• Actual driving 1.86 mi (3 km) or more

NOTE: Save the odometer information of combination meter in ABS actuator and electric unit (control unit).