Work Procedure

Always perform the additional service after replacing the ADAS control unit 2.

1. ADAS CONTROL UNIT 2 CONFIGURATION 

   Perform the ADAS control unit 2 configuration. Refer to Work Procedure .

   >>

   GO TO 2

   .

2. WRITING MAC KEY 

   Perform MAC key writing. Refer to Work Procedure .

   With ProPILOT Assist>>

   GO TO 3

   .

   Without ProPILOT Assist>>

   INSPECTION END

3. STEERING TORQUE CALIBRATION 

   Perform the steering torque calibration. Refer to Work Procedure .

   >>

   INSPECTION END