Work Procedure
Vehicle specification needs to be written with CONSULT because it is not written after replacing the ADAS control unit 2. The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the ADAS control unit 2.
NOTE:
For details the network connection and operation, refer to "CONSULT Operation Manual". The configuration no need to "save" configuration data from the ADAS control unit 2. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
CAUTION:
- Complete the procedure of "Configuration" for the correct order, refer to Work Procedure .
- If incorrect "Configuration", incidents might occur.
- WRITING VEHICLE SPECIFICATION
With CONSULT Perform writing vehicle specification to ADAS control unit 2 following "Configuration" procedure according to CONSULT Operation Manual.
Regarding replacement the ADAS control unit 2, Refer to Removal and Installation .
CONSULT Operation Manual Conformation Procedure
- Select a Search Tab "Configuration"
- Operate in order according to "ECU Replacement" pages.
NOTE:- Log in the network according to CONSULT guidance.
- For details the network connection and operation, refer to "CONSULT Operation Manual".
>>
WORK END