Removal Procedure
- Remove the engine shield. Refer to ENGINE SHIELD REPLACEMENT .
- Loosen the rear part of the front wheelhouse front liner. Refer to FRONT WHEELHOUSE FRONT LINER REPLACEMENT .
- Remove front transmission mount to subframe fastener. Refer to TRANSMISSION FRONT MOUNT REPLACEMENT .
- Lower the vehicle.
- Remove the battery tray. Refer to BATTERY TRAY REPLACEMENT .
-
WARNING: In order to avoid oil pan damage and possible engine failure, insert a block of wood that spans the width of the oil pan bottom between the oil pan and the jack support.
Support the transmission using a jack.
- Remove transmission mount fasteners (1)
- Lower the transmission.
- Remove transmission mount fasteners (2).
- Remove the left side transmission mount (4).