FixVault
Home › Saturn › 2007 › Vue Red Line, AWD › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Multifunction Turn Signal Switch Housing Replacement › Removal Procedure

Removal Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  3. Remove the steering wheel. Refer to Steering Wheel Replacement .
  4. Remove the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement .
    5. Fig 1: View Of Multifunction Turn Signal Switch Housing
    GM1829830Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector and depress the locking tabs to remove the turn signal multifunction switch.
    6. Fig 2: View Of Wiper Washer Switch
    GM1829839Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector and depress the locking tabs to remove the wipers/washer switch.
  7. Disconnect the ignition housing electrical connectors.
    8. IMPORTANT: Support the ignition housing prior to removal of the multifunction housing to ignition housing bolts.
    Fig 3: View Of Multifunction Housing To Ignition Housing Bolts
    GM1829854Courtesy of GENERAL MOTORS CORP.
  8. Remove the 2 multifunction housing to ignition housing bolts.
    9. Fig 4: View Of Multifunction Lever Bracket
    GM1829881Courtesy of GENERAL MOTORS CORP.
  9. Slide the multifunction lever bracket from the steering column.
About FixVault