Fuel Pressure Regulator: Installation

1. Apply gasoline to 2 new O-rings and then install them onto the fuel pressure regulator assembly.
   Fig 1: Locating Fuel Pressure Regulator Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the fuel pressure regulator assembly.

Refer to the procedures under "INSTALL FUEL PUMP" (See REASSEMBLY  ).

Fig 2: Locating Fuel Pressure Regulator Assembly

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

(See FUEL SYSTEM  )