FixVault
Home › Subaru › 2005 › Outback R › Repair and Diagnosis › External Pages › Different car › Section 52 (Security And Locks) › Security Control Module › Adjustment › Impact Sensitivity

Impact Sensitivity

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before adjustment, make sure the security control module has been securely installed on the bracket.
  1. Remove the security control module. < Ref. to , REMOVAL , Security Control Module. >
  2. Adjust the sensitivity adjust screw in the security control module.
    NOTE: After adjusting, be sure to plug the adjust screw hole.
    Fig 1: Adjusting Sensitivity Adjust Screw In Security Control Module
    G03752494Courtesy of SUBARU OF AMERICA, INC.
  3. Install the security control module.
  4. Perform the impact sensitivity test.
About FixVault