Transmission Control Module (TCM): Installation

Install the relay to TCM body.
Install the TCM.
Tightening torque:

7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Fig 1: Identifying Transmission Control Module And Steering Column
Courtesy of SUBARU OF AMERICA, INC.
Connect the connector to the TCM.
Install in the reverse order of removal.
Perform Clear Memory 2 operation. <Ref. to CLEAR MEMORY MODE , Operation, Subaru Select Monitor .>
Perform the inspection with driving the vehicle at the end of repair work, and make sure there is no faulty as below;
- Excessive shift shock
- Oil leakage from the transmission body, etc.
- Occurrence of noise caused by interference etc.
NOTE: If excessive shift shock is felt, execute advance operation of learning control. <Ref. to PROCEDURE , Learning Control .>