FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 122 (Entertainment System) › Front Accessory Power Supply Socket › Removal

Front Accessory Power Supply Socket: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Remove the console front panel. <Ref. to REMOVAL , Center Console .>
  3. Disconnect the harness connector, and remove the accessory power supply socket.
    Fig 1: Removing Front Accessory Power Supply Socket
    G05022581Courtesy of SUBARU OF AMERICA, INC.
About FixVault