FixVault
Home › Subaru › 2011 › Outback Limited › Repair and Diagnosis › External Pages › Different car › Section 84 (Continuously Variable Transmission) › Converter Case › Removal

Converter Case: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. Refer to , REMOVAL , Automatic Transmission Assembly.
  2. Remove the air breather hose. Refer to , REMOVAL , Air Breather Hose.
  3. Remove the oil pan and control valve body. Refer to , REMOVAL , Control Valve Body.
  4. Remove the transmission harness. Refer to , REMOVAL , Transmission Harness.
  5. Remove the secondary pressure sensor. Refer to , REMOVAL , Secondary Pressure Sensor.
  6. Remove the primary speed sensor. Refer to , REMOVAL , Primary Speed Sensor.
  7. Remove the extension case. Refer to , REMOVAL , Extension Case.
  8. Remove the rear drive shaft. Refer to , REMOVAL , Rear Drive Shaft.
  9. Remove the transfer clutch assembly. Refer to , REMOVAL , Transfer Clutch.
  10. Remove the transfer reduction driven gear assembly. Refer to , REMOVAL , Transfer Reduction Driven Gear.
  11. Remove the intermediate case. Refer to , REMOVAL , Intermediate Case.
  12. Remove the forward clutch assembly. Refer to , REMOVAL , Forward Clutch Assembly.
  13. Remove the transmission case. Refer to , REMOVAL , Transmission Case.
  14. Remove the primary pulley, secondary pulley and variator chain. Refer to , REMOVAL , Primary Pulley and Secondary Pulley.
  15. Remove the drive pinion shaft assembly. Refer to , REMOVAL , Drive Pinion Shaft Assembly.
  16. Remove the front differential assembly. Refer to , REMOVAL , Front Differential Assembly.
  17. Remove the converter case cover. Refer to , REMOVAL , Converter Case Cover.
  18. Remove the front reduction drive gear and front reduction driven gear. Refer to , REMOVAL , Front Reduction Drive Gear.
About FixVault