Electrical Specification

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Body integrated unit
For I/O signals of the body integrated unit, refer to BODY CONTROL SYSTEM (DIAGNOSTICS). < Ref. to CONTROL MODULE I/O SIGNAL . >
Engine Control Module
For I/O signals of ECM, refer to ENGINE (DIAGNOSTICS). < Ref. to ELECTRICAL SPECIFICATION , Engine Control Module (ECM) I/O Signal. >
Transmission Control Module
For I/O signals of TCM, refer to AUTOMATIC TRANSMISSION (DIAGNOSTICS). < Ref. to TRANSMISSION CONTROL MODULE (TCM) I/O SIGNAL . >
VDC Control Module, steering angle sensor, yaw rate & G sensor
For the module I/O signals of VDC Control Module, steering angle sensor, and yaw rate & G sensor, refer to VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS). < Ref. to CONTROL MODULE I/O SIGNAL . >
Power Steering Control Module
For unit I/O signals of Power Steering Control Module, refer to POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS). < Ref. to CONTROL MODULE I/O SIGNAL . >
A/C control panel
For unit I/O signals of A/C control panel, refer to HVAC SYSTEM (DIAGNOSTICS). < Ref. to AUTO A/C CONTROL MODULE I/O SIGNAL . >
Combination meter
For I/O signals of combination meter, refer to INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS). < Ref. to CONTROL MODULE I/O SIGNAL . >
Airbag Control Module
For I/O signals of the Airbag Control Module, refer to AIRBAG SYSTEM (DIAGNOSTICS). < Ref. to AIRBAG CONTROL MODULE I/O SIGNAL . >
High grade MFD
For I/O signals of high grade MFD, refer to INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS). < Ref. to CONTROL MODULE I/O SIGNAL . >
Keyless Access Control Module
For I/O signals of Keyless Access Control Module, refer to KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS). < Ref. to CONTROL MODULE I/O SIGNAL . >
Stereo camera
For I/O signals of stereo camera, refer to EyeSight (Diagnostics). < Ref. to STEREO CAMERA , ELECTRICAL SPECIFICATION, Control Module I/O Signal. >
Auto Headlight Beam Leveler Control Module
For I/O signals of Auto Headlight Beam Leveler Control Module, refer to AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS). < Ref. to AUTO HEADLIGHT BEAM LEVELER CONTROL MODULE , ELECTRICAL SPECIFICATION, Control Module I/O Signal. >
Data link connector
For I/O signals of data link connector, refer to ENGINE (DIAGNOSTICS). < Ref. to DATA LINK CONNECTOR . >

* CAN sleep state:

Hold on for approx. one minute with ignition OFF and the doors, trunk, rear gate all closed.