Power Window Control Switch: Removal: Sub-Switch

Switch - power window sub front 

For removal of the switch - power window sub front on the passenger's seat, refer to the removal procedure of the switch - power window main. < Ref. to MAIN SWITCH , REMOVAL, Power Window Control Switch. >

Switch - power window sub rear 

1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
2. Remove the trim panel - rear door. < Ref. to REAR DOOR , REMOVAL, Door Trim. >
3. Remove the panel - power window sub switch rear.
   CAUTION: Be careful not to damage the trim panel - rear door with the panel - power window sub switch rear.
   1. Insert a sheet of protective paper (a) between panel - power window sub switch rear and trim panel - rear door.
   2. Remove the screws.
      Fig 1: Inserting Sheet Of Protective Paper Between Rear Power Window Sub Switch Panel And Rear Door Trim Panel

      Courtesy of SUBARU OF AMERICA, INC.
   3. Release the claws, and then remove the panel - power window sub switch rear.
      Fig 2: Identifying Rear Power Window Sub Switch Panel Claws

      Courtesy of SUBARU OF AMERICA, INC.
4. Release the claws, and then remove the switch - power window sub rear.
   Fig 3: Identifying Rear Power Window Sub Switch Claws

   Courtesy of SUBARU OF AMERICA, INC.