Combination Meter: Installation
CAUTION:
- Make sure the electrical connector is connected securely.
- Make sure that each meter operates normally.
- For the model without keyless access with push button start except for C0 and C5 models, when the combination meter assembly is replaced, perform the registration of immobilizer. For detailed operation procedure, refer to "Type B" described in "REGISTRATION MANUAL FOR IMMOBILIZER".
- When the combination meter is replaced, perform the variant work. <Ref. to VARIANT WORK , OPERATION, Combination Meter System.>
- Install the combination meter assembly.
Tightening torque:
7 N.m (0.7 kgf-m, 5.2 ft-lb)
- Install the visor assembly - lower.
- Install the cover assembly - instrument panel LWR driver.
- Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>