FixVault
Home › Subaru › 2017 › Outback 2.5i › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transaxle (CVT) (H4DO) › Reduction Driven Gear › Installation

Reduction Driven Gear: Installation

  1. Install the reduction driven gear assembly and spacer oil.

    Tightening torque: 

    17 N.m (1.7 kgf-m, 12.5 ft-lb) 

    Fig 1: Reduction Driven Gear Assembly With Bolts
    G10218734Courtesy of SUBARU OF AMERICA, INC.
  2. Select the transfer drive gear shim. <Ref. to ADJUSTMENT , Reduction Drive Gear.>
  3. Install the parking pawl. <Ref. to INSTALLATION , Parking Pawl.>
  4. Attach the selected transfer drive gear shim to extension case with vaseline.
  5. Install the transfer driven gear assembly. <Ref. to INSTALLATION , Transfer Driven Gear.>
  6. Install the transfer clutch assembly. <Ref. to INSTALLATION , Transfer Clutch.>
  7. Install the extension case. <Ref. to INSTALLATION , Extension Case.>
  8. Install the transmission assembly. <Ref. to INSTALLATION , Automatic Transmission Assembly.>
About FixVault